This is of great interest as it
should allow us to predict the minimal size for liquid based cores without relying
entirely on theoretical ideas. It is
clearly a fair bit smaller than the moon and must be expected everywhere.
One of the future challenges will
be to establish a base on Mercury. That
has a night time surface temperature of 200K which is good enough to land. A high temperature fabric over a base site
could make it possible to operate during daytime which is quite long due to the
slow rotation. The vacuum would act as the insulator. The real problem is
protection from the massive radiation, not only on the ground but on the
approach.
The interesting thing is that the
rocks there are warm enough to h0old heat at 200K or thereabouts. Thus mining into the surface may provide a
well protected environment.
The same option should exist on
the moon. More importantly, a deep mine will access heat, which is naturally
available and could provide a thermal engine that can be used to produce water
and a range of raw material. Such a mine
could need to penetrate several miles before it becomes effective (two miles is
good enough on Earth for most needs except geothermal.
Moon has liquid core just like Earth... reveal sensors left on lunar
surface by astronauts 40 YEARS ago
By GRAHAM
SMITH
Last updated at 1:16 PM on 7th January 2011
It's an unlikely marriage between state-of-the-art and 40-year-old
technology that has yielded extraordinary results.
Signals from seismic sensors left on the lunar surface by Apollo
astronauts in 1971 have revealed that the Moon has a liquid core similar to
Earth's.
Scientists at Nasa applied contemporary seismological techniques to the
data being emitted from sensors placed by their colleagues during the U.S.
space program's heyday.
Core knowledge: Nasa applied contemporary seismological techniques to
data being emitted from sensors left on the Moon in 1971. Scientists now think
the Moon has a solid, iron-rich inner core and a fluid, primarily liquid-iron
outer core
The new research suggests the Moon possesses a solid, iron-rich inner
core with a radius of nearly 150 miles and a fluid, primarily liquid-iron outer
core with a radius of roughly 205 miles.
Where it differs from Earth is a partially molten boundary layer around
the core estimated to have a radius of nearly 300 miles.
The data sheds light on the evolution of a lunar dynamo - a natural
process by which our Moon may have generated and maintained its own strong
magnetic field.
Uncovering details about the lunar core is critical for developing
accurate models of the Moon’s formation.
The core contains a small percentage of light elements such as sulphur,
echoing new seismology research on Earth that suggests the presence of light
elements - such as sulphur and oxygen - in a layer around our own core.
The research, published in the online edition of journal Science, used
extensive data gathered during the Apollo-era Moon missions.
The Apollo Passive Seismic Experiment consisted of four seismometers deployed
between 1969 and 1972, which recorded continuous lunar seismic activity until
late 1977.
Dr Renee Weber, lead researcher a Nasa’s Marshall Space Flight Center
in Huntsville, Alabama, said: 'We applied tried and true methodologies from
terrestrial seismology to this legacy data set to present the first-ever direct
detection of the Moon’s core.'
The team also analysed Apollo lunar seismograms using array processing,
techniques that identify and distinguish signal sources of moonquakes and other
seismic activity.
The researchers identified how and where seismic waves passed through
or were reflected by elements of the Moon’s interior, signifying the
composition and state of layer interfaces at varying depths.
Although sophisticated satellite imaging missions to the Moon made
significant contributions to the study of its history and topography, the deep
interior of Earth’s sole natural satellite remained a subject of speculation
and conjecture since the Apollo era.
Scientists had previously inferred the existence of a core, based on
indirect estimates of the Moon’s interior properties, but many disagreed about
its radius, state and composition.
A primary limitation to past lunar seismic studies was the wash of
'noise' caused by overlapping signals bouncing repeatedly off structures in the
Moon’s fractionated crust.
To mitigate this challenge, Dr Weber and her team employed an approach
called seismogram stacking, or the digital partitioning of signals.
Stacking improved the signal-to-noise ratio and enabled the researchers
to more clearly track the path and behaviour of each unique signal as it passed
through the lunar interior.
Dr Weber said: 'We hope to continue working with the Apollo seismic
data to further refine our estimates of core properties and characterise lunar
signals as clearly as possible to aid in the interpretation of data returned
from future missions.'
Future Nasa missions will help gather more detailed data. The Gravity
Recovery and Interior Laboratory - or GRAIL - is a Nasa Discovery-class mission
set to launch this year.
The mission consists of twin spacecraft that will enter tandem orbits
around the Moon for several months to measure the gravity field in
unprecedented detail.
It will also answer long-standing questions about Earth’s moon and
provide scientists a better understanding of the satellite from crust to core,
revealing subsurface structures and, indirectly, its thermal history.
1 comment:
Although it is very speculative, nonetheless, the chemical conditions exist to suggest a feasible theory about terraforming the Moon, by using its own surface material, to be ignited with the intense heat of a small nuclear bomb. From materials brought by the Apollo astronauts, it shows that the Moon's surface contains an abundance of Oxygen, Hydrogen and Nitrogen, though these elements do not occur in free form on the Moon, but in rather strong chemical bounds in silicates of the regolith. (regolith = the layer of unconsolidated solid material, covering the bedrock of a planet). Read more here:
http://www.lunar-union.org/planetary-engineering/terraforming_moon.html
Post a Comment