Thursday, June 1, 2023

Silicon heterojunction solar cells with up to 26.81% efficiency

Silicon heterojunction solar cells with up to 26.81% efficiency 

I do not know just how far this will take us but it appears that we may be able to upgrade from best performance of around 20% to 25% which is at least good.

This is also a reminder of just how slow progress has been here.

I would like to see more progress on the thermal power grab as well using actually small parabolic mirror constructs with the mirrors also absorbing that photovoltaic energy.  making that really efficient would be welcome.  We do not really see heat radiation per se and it is a separate band width anyway.

Silicon heterojunction solar cells with up to 26.81% efficiency

Electrical performance of LONGi SHJ solar cells with different designs. a, Diagram of LONGi SHJ solar cells. b,c, Experimental (Exp.) and fitted (Fit.) J–V curves for the p-a-Si:H cell (b, cell 1 in Fig. 1) and the p-nc-Si:H cell (c, cell 2 in Fig. 1). The fitted curves are derived from the Quokka2 simulations (Methods). Intrinsic J–V curves are obtained according to the Richter et al. model of intrinsic recombination with photon recycling (photon recycling coefficient of 0.6). The black arrows between the Suns–VOC and light J–V curves indicate the series resistance of solar cells. Insets: the PV parameters certified by ISFH. d, PLA and corresponding RS at the MPP derived by fitting J–V curves in b and c; rec, recombination. The loss of intrinsic recombination is not shown, and only the RS at the rear is analyzed. Credit: Nature Energy (2023). DOI: 10.1038/s41560-023-01255-2

Solar energy is the cheapest and most accessible form of energy. Now, it promises to be more efficient than ever. Scientists from a Chinese solar technology company have developed a new type of solar cell that could be a game-changer in the world's transition towards renewable energy.

Advanced modeling, performed by researchers at TU Delft, played a pivotal role in the deep understanding and engineering of the innovation. The new solar cell is made of the same material as 95% of all current solar cells but performs much better at 26.81% efficiency. The innovation further cements the crucial role of solar cells in the energy transition. The research results were published May 4 in Nature Energy.

The report on this breakthrough is the result of a unique international collaboration between LONGi Green Energy Technology Co., Ltd,—one of the global leading producers of solar cells of the highest quality—together with Sun Yat-Sen University (SYSU) and Delft University of Technology (TU Delft). The team optimized the design of the solar cell by using a much improved "nanocrystalline-silicon hole contact layer." Such a new layer has been known as a theoretical possibility for quite some time, but it was never successfully put into practice.

The new layer can transfer electricity with far less resistance and results in a higher power conversion efficiency than any other type of solar cell made from crystalline silicon. Researchers at LONGi developed this new technology on standard, industry-grade silicon wafers, making the technology almost immediately applicable in the production of solar panels.

The improved performance of a cell is significant when compared to previous technologies, demonstrating an absolute leap forward in conversion efficiency of 1.5%. "This tops performance of all other crystalline silicon solar cell architectures to date, which accounts for more than 95% solar cells produced worldwide," says Xixiang Xu, vice president of LONGi Central R&D Institute.
Beyond surface passivation

Scientists at SYSU were instrumental in analyzing and studying the exact flow of electricity through the new layers. The team looked at cells that had those layers compared to cells that did not. They found that the cells with the new layers conducted electricity better because they had a low activation energy if they were positioned just right. They revealed that the bulk Auger process will gradually take the leading role as surface recombination recedes in highly passivated silicon heterojunction solar cells. In other words, the achieved quality of the surface passivation is so high, that fill factor and power conversion efficiency can be propelled forward.

"Study on silicon hole contact layers with low activation energy is very timely and extremely important, our work represents great advance on exploration of the electrical performance of hole contacts, beneficial for heterojunctions, hybrids and all silicon-based solar cells," says Pingqi Gao, professor at SYSU. The demonstration of this solar cell architecture significantly accelerates the energy transition with the deployment of more efficient photovoltaic modules.

Advanced modeling, performed by researchers at TU Delft, played a pivotal role in realizing the innovation. With new models, the team was able to detail the energy barriers across the interfaces forming the rear-junction of the LONGi solar cell. In this way, the collection path of holes across the interfaces could be analyzed, explaining the outstanding performance of the device.

"It is great to witness in real and large area devices what we theoretically predicted to be the best combination of material properties for hole-contact layers to achieve ideal hole transport in this type of cells," says Paul Procel, postdoctoral researcher at TU Delft. "The mastery achieved by LONGi of ultra-thin layers deposition with fine control of their opto-electrical properties is stunning. Modeling their solar cells pushes the boundary of what we mean with ideal crystalline silicon devices," adds Olindo Isabella, professor at TU Delft.

No comments: