It appears to have finally all
come together to produce superb interpretive data on forests with excellent
ground truthing. The forest industry
will certainly be at the forefront to use this technology because it eliminates
much of the guess work and allows a harvest to be properly analyzed. It also allows the regulator and the logger
to determine the best locations for natural refugia as forest management matures.
Prior to this the methodology was
to rely on timber cruising which is okay in the boreal forest but quickly
suspect in broken terrain. Now a timber
cruise will provide ground truth for a prepared map and data set already analyzed.
We will now be able to plan and
do things that we only dreamed of in the past as been a good idea.
Much of the frustration with the wreckage
produced by industrial practice of the past resulted from the outright
limitation of the available tools which left the loggers few options. These tools pull us toward a day of high
volume selective logging and moderately disturbed forests and general habitats.
I want to see airships put to
work at the task of pulling stems out of the forests thus avoiding the need for
roads and heavy ground equipment. They
have the lift and do not burn fuel to any significance unlike an industrial
chopper. The actual preparation of a
stem has remained a faller’s task. The
combination would allow a forest to be selectively high graded while leaving
the rest in place for another twenty years to allow the maturation of another
harvest. It could even be done faster if
forest grooming is also practiced.
A Revolutionary Technology is Unlocking Secrets of the Forest
A new imaging system that uses a suite of airborne sensors is capable of
providing detailed, three-dimensional pictures of tropical forests — including
the species they contain and the amount of CO2 they store — at astonishing
speed. These advances could play a key role in preserving the world’s
beleaguered rainforests.
by rhett butler
03 OCT 2011: REPORT
This summer, high above the Amazon rainforest in
Conceived by Greg Asner, a scientist at the Carnegie Institution for Science, the new system — known as AToMS, or the Airborne Taxonomic Mapping System— has the potential to transform how tropical forest research is done.
conducted. By combining several breakthrough technologies, Asner and
his colleagues can capture detailed images of individual trees at a rate of
500,000 or more per minute, enabling them to create a high-resolution,
three-dimensional map of the physical structure of the forest, as well as its
chemical and optical properties. In Peru, the scientists hoped to not only
determine what tree species lay below, but also to gauge how the ecosystem was
responding to last year’s drought — the worst ever recorded in the Amazon — as
well as help Peru develop a better mechanism for monitoring deforestation and
degradation.
Asner’s new system, a significant advance on the so-called Carnegie Airborne Observatory (CAO) that he originally developed in 2006, could also play a vital role in global forestry in the decades ahead. The technology could help alleviate uncertainty about carbon emissions from deforestation and different forms of forest management, both of which are critical to the emerging policy of REDD(Reducing Emissions form Deforestation and
“The whole idea was to measure each of the things plant ecologists measure on the ground to evaluate biodiversity,” said Asner, as he flew over the Amazonian cloud forest. Asner is now helping the National Science Foundation develop an airplane with this suite of monitoring technologies, and is in talks with NASA about equipping a satellite with the system.
One of the key technologies Asner uses is known as LiDAR, which employs two powerful lasers to blast through canopy vegetation, reach the forest floor, and return a wealth of information about the forest’s structure. Depending on the aircraft’s altitude, sensors can map the forest at resolutions ranging from 10 centimeters to one meter, fine enough to “see” understory shrubs and epiphytes in tree crowns. LiDAR is also very good for measuring aboveground biomass, or the amount of carbon stored in a forest’s vegetation.
It can also detect surface elevations to identify watersheds and
waterways.
To truly understand an ecosystem, however, scientists need to know more about its characteristics, including aspects that can’t be been with the naked eye. This is where Asner’s CAO really sets itself apart, using newly developed sensors — built by engineers at NASA’s Jet Propulsion Laboratory — that can detect dozens of signals, including photosynthetic pigment concentrations, water content of leaves, defense compounds like phenols, structural compounds such as lignin and cellulose, as well as phosphorous and other micronutrients — all of which can be used to build signatures to distinguish individual plant species, as well as other measures of forest condition. The result, using the so-called VSWIR Imaging Spectrometer, is a system that can map the chemical and spectral attributes of a forest that may have more than 200 species of trees in a single hectare.
“When leaves interact with sunlight, the compounds bend, stretch, and vibrate at different patterns and rates,” said Asner. “These different rates led to different scattering of light. The spectrometer picks up on this and we’ve been able to deduce chemicals from these signatures.”
But for the CAO to accurately assess biodiversity, Asner’s team has to first do the groundwork by creating a database of the chemical and spectral properties of various plants, which are then fed into the CAO’s library of information on individual plant species. These are then correlated with the data collected by the CAO’s various sensors.
In the Amazon, Asner and his team conducted extensive, on-the-ground
work to compile information on nearly 5,000 plant species. “We have the best
team of tree climbers in the world,” said Asner. “They can climb 75 trees a
day, conducting full sampling.”
The aircraft that carries the system allows Asner’s team to map very large areas, sometimes more than 49,000 hectares (120,000 acres) a day. In 2009, using an older, less sophisticated version of the system, Asner mapped 4.3 million hectares ofPeru ’s Madre de Dios region. Now he is working on a bigger
scale: nearly the entire Peruvian Amazon. After this, he goes to Colombia and Panama .
The aircraft that carries the system allows Asner’s team to map very large areas, sometimes more than 49,000 hectares (120,000 acres) a day. In 2009, using an older, less sophisticated version of the system, Asner mapped 4.3 million hectares of
“We’re looking at biodiversity in regions that have never been put down on the science map,” said Asner.
No comments:
Post a Comment