Cold Fusion Reactor Verified by Third-Party Researchers at one Million Times Energy Density of Gasoline

The Rossi Ecat cold fusion reactor has passed third party testing with flying colors.  This is great news. This is also a major advance in physics as well.  The original phenomena was marginal.  this is no longer the case.

I have watched this for several years so far and each step forward has been painful. now we have something worthwhile right now.

It is still a heat engine, but guess what, we need heat engines.  In fact after transport it is the next big need.  Transport is now a solved problem but i would rather not convert direct electrical power into a heating device it there is a better alternative.  This looks good enough.

.

 Cold fusion reactor verified by third-party researchers, seems to have 1 million times the energy density of gasoline

By Sebastian Anthony on October 9, 2014 at 10:53 am

http://www.extremetech.com/extreme/191754-cold-fusion-reactor-verified-by-third-party-researchers-seems-to-have-1-million-times-the-energy-density-of-gasoline 

Andrea Rossi’s E-Cat — the device that purports to use cold fusion to generate massive amounts of cheap, green energy — has been verified by third-party researchers, according to a new 54-page report. The researchers observed a small E-Cat over 32 days, where it produced net energy of 1.5 megawatt-hours, or “far more than can be obtained from any known chemical sources in the small reactor volume.” The researchers were also allowed to analyze the fuel before and after the 32-day run, noting that the isotopes in the spent fuel could only have been obtained by “nuclear reactions” — a conclusion that boggles the researchers: “… It is of course very hard to comprehend how these fusion processes can take place in the fuel compound at low energies.” 

This new report [PDF] on the E-Cat was carried out by six (reputable) researchers from Italy and Sweden. While the new E-Cat looks very different from previous iterations, the researchers say that it uses the same “hydrogen-loaded nickel” and additives (most notably lithium) as a fuel. The device’s inventor, Andrea Rossi, claims that the E-Cat uses cold fusion — low-energy nuclear reactions, LENR — to fuse nickel and hydrogen atoms into copper, releasing oodles of energy. The researchers, analyzing the fuel before and after the 32-day burn, note that there is an isotope shift from a “natural” mix of Nickel-58/Nickel-60 to almost entirely Nickel-62 — a reaction that, the researchers say, cannot occur without nuclear reactions (i.e. fusion). The researchers say there is just 1 gram of fuel inside the E-Cat. For more info about the science/chemistry behind LENR, read our previous story about Rossi’s E-Cat. 

New style E-Cat device being weighed 

The E-Cat test setup 

The researchers are very careful about not actually saying that cold fusion/LENR is the source of the E-Cat’s energy, instead merely saying that an “unknown reaction” is at work. In serious scientific circles, LENR is still a bit of a joke/taboo topic. The paper is actually somewhat comical in this regard: The researchers really try to work out how the E-Cat produces so much darn energy — and they conclude that fusion is the only answer — but then they reel it all back in by adding: “The reaction speculation above should only be considered as an example of reasoning and not a serious conjecture.” 

Anyway, now that we’ve got the necessary cynicism/scrutiny out of the way, let’s get down to what everyone’s really interested in: The utterly insane amounts of energy produced by the E-Cat. In the table below you can see some figures from the 32-day test. The most important figures are on the right hand side: a COP (coefficient of performance) of up to 3.74, and net power production of 2,373 watts. Remember that this is a small device that produced these kinds of figures for 32 days straight. Total energy obtained over 32 days was 1.5 MWh. 

To put this into perspective, the E-Cat tested by the researchers has an energy density of 1.6×109 Wh/kg and power density of 2.1×106 W/kg. This is orders (plural) of magnitude higher than anything else ever tested — somewhere in the region of 100 times more power than the best supercapacitors, and maybe a million times more energy than gasoline. In the words of the researchers, “These values place the E-Cat beyond any other known conventional source of energy.” 

This is what a commercialized E-Cat will apparently look like, when Rossi finally gets around to changing the world. 

Obviously, if these third-party findings are to be believed — if the E-Cat really is performing cold fusion — then this is rather exciting. We are talking about an extremely cheap, green, and dense power source that could quite literally change the world. 

Before the world can be changed, however, there will now be a very extensive period of scrutiny from the scientific community at large. The previous third-party analysis of the E-Cat device, published in March 2013, was attacked and debunked very rapidly. It seems this new report has been intentionally designed so that there are fewer plot holes and logical leaps. The research paper has reportedly been submitted to the Arxiv pre-print server, with the hope of eventually being published in the Journal of Nuclear Physics. 

The next few weeks could be very interesting indeed. According to one report at Sifferkoll, a big bank downloaded the new E-Cat report just minutes after it was made available online — and “oil futures have stayed volatile since.” And of course this morning Glasgow University announced that it would be selling its fossil fuel investments. Hmm…