Wednesday, May 4, 2022

Recycled soot coating captures solar heat better than graphene



Soot is a very real radiation recepter and it has the widest possible distribution of scales.  We actually selected using water a narrow size range to produce nanoparticles able to grab large molecules.

My point is that soot has potential value as an industerial raw material to support all frorms of reactions and nicely bypasses the difficulties in producing a special size.

Al.l good science here.


Recycled soot coating captures solar heat better than graphene

May 01, 2022


The team's solar stove, made up of a central container coated in a soot paste to increase solar heat absorption

https://newatlas.com/environment/recycled-soot-coating-solar-heat-capture/



Tackling climate change doesn’t just require efforts like renewable energy – we need to clean up existing processes too. Now, engineers have developed a way to use soot from emissions to improve solar thermal devices, making them not only cheaper to produce but more efficient than using materials like graphene.


Gathering energy from the Sun doesn’t have to just involve photovoltaic solar cells – collecting its heat can also be used to generate electricity, purify water, cook food, or warm buildings. The best materials for absorbing this heat are dark in color, so different forms of carbon are most often used, including graphene or carbon nanotubes – the latter of which is used to make some of the blackest materials on Earth.



The problem is, producing these carbon materials in bulk can be fiddly and expensive. So for the new study, researchers at the University of Houston and Universidad Intercultural Indígena de Michoacán (UIIM) in Mexico have experimented with a far more common carbon form – soot.

A by-product of burning materials like coal, wood and hydrocarbon fuels, soot is an amorphous, impure form of carbon that wreaks havoc on the environment and human health. Collecting it from the point of emission can reduce these negative effects, and using it to improve renewable energy helps close the loop and cut costs.


“There is no energy involved in producing soot because it is an abundant byproduct, and its circular-reutilization can only reduce carbon footprints,” said Francisco Robles-Hernández, corresponding author of the study. “The cost is near-zero, which makes it cost-effective and ideal for solar to heat conversion.”

In the study, the researchers built a prototype solar stove. The device consisted of a mirrored dish that reflected and focused sunlight onto its center, where a container sat. This container was coated in a black solar-absorbing paste made with either soot or other forms of carbon, such as graphene, nanotubes and fullerene, to compare how well they worked.

And sure enough, soot outperformed the other materials in a few key areas. Its solar absorptivity was 96 percent higher than commercial products, its light emission was 85 percent higher, and it was 15 times cheaper. Compared to pristine carbon forms like graphene, soot coatings were up to 1,000 times cheaper.


The researchers say that soot-based heat-absorbing materials could be used for solar stills, heating for water pipes or homes, water purifiers, and industrial drying processes.

The research was published in the journal Carbon.

No comments:

Post a Comment