Thursday, May 26, 2011

Thin Film Solar Cell Design Concept




This is some more tweaking of solar cell tech and should lead to further improvements in economics and general efficiencies.  Solar tech continues to be stalled in much the same place it has held for a decade, in spite of plenty of brave announcements by venture capitalists.

It needs either a breakthrough in spectrum absorption and conversion or a significant drop in manufacturing cost.  At this late date I do not hold out much optimism when it will all be scrap when they start shipping eight times unity reactor from Rossi Focardi.

In the meantime we continue to watch these efforts.

'Swiss cheese' design enables thin film silicon solar cells with potential for higher efficiencies

by Staff Writers

College Park, MD (SPX) May 10, 2011

This SEM micrograph shows the nanostructured ZnO layer, Swiss cheese design for Micromorph solar cells. Credit: Milan Vanecek, Institute of Physics, Prague



A bold new design for thin film solar cells that requires significantly less silicon - and may boost their efficiency - is the result of an industry/academia collaboration between Oerlikon Solar in Switzerland and the Institute of Physics'photovoltaic group at the Academy of Sciences of the Czech Republic.

One long-term option for low-cost, high-yield industrial production of solarpanels from abundant raw materials can be found in amorphous silicon solar cells and microcrystalline silicon tandem cells (a.k.a. Micromorph)-providing an energy payback within a year.

A drawback to these cells, however, is that the stable panel efficiency is less than the efficiency of presently dominate crystalline wafer-based silicon, explains Milan Vanecek, who heads the photovoltaic group at the Institute of Physics in Prague.

"To make amorphous and microcrystalline silicon cells more stable they're required to be very thin because of tight spacing between electrical contacts, and the resulting optical absorption isn't sufficient," he notes.

"They're basically planar devices. Amorphous silicon has a thickness of 200 to 300 nanometers, while microcrystalline silicon is thicker than 1 micrometer."

The team's new design focuses on optically thick cells that are strongly absorbing, while the distance between the electrodes remains very tight. They describe their design in the American Institute of Physics' journal Applied Physics Letters.

"Our new 3D design of solar cells relies on the mature, robust absorber deposition technology of plasma-enhanced chemical vapor deposition, which is a technology already used for amorphous silicon-based electronics produced for liquid crystal displays. We just added a new nanostructured substrate for the deposition of the solar cell," Vanecek says.

This nanostructured substrate consists of an array of zinc oxide (ZnO) nanocolumns or, alternatively, from a "Swiss cheese" honeycomb array of micro-holes or nano-holes etched into the transparent conductive oxide layer (ZnO) (See Figure).

"This latter approach proved successful for solar cell deposition," Vanecek elaborates.

"The potential of these efficiencies is estimated within the range of present multicrystalline wafer solar cells, which dominate solar cell industrial production. And the significantly lower cost of Micromorph panels, with the same panel efficiency as multicrystalline silicon panels (12 to 16 percent), could boost its industrial-scale production."

The next step is a further optimization to continue improving efficiency.

The article, "Nanostructured 3-dimensional thin film silicon solar cells with very high efficiency potential," by Milan Vanecek, Oleg Babchenko, Adam Purkrt, Jakub Holovsky, Neda Neykova, Ales Poruba, Zdenek Remes, Johannes Meier, and Ulrich Kroll, appears in the journal Applied Physics Letters.

No comments:

Post a Comment