The next step is to find a way to carry off the electrons from the nanodots. This work shows that hot electrons can be captured without been lost as heat. This means that solar cells able to convert sixty percent of solar energy are theoretically possible.
I think it may all be possible.
We are slowly converging on higher efficiency with solar cells and mastering these sizes in a manufacturing process was always indicated to achieve high efficiency.
In this case, the newly released electron which is about to reradiate heat is captured first.
I would like to see a strategy to directly convert heat into electron flow since we live in an ocean of such heat energy. Our focus has been on the visible spectrum, but infrared spectrum is also plentiful and should be exploited.
The second article provides better detail and covers the same material that augments the first article.
Charge of the light brigade: How quantum dots may improve solar cells
By David Biello
Jun 18, 2010
Photovoltaic cells remain woefully inefficient at converting sunlight into electricity. Although layered cells composed of various elements can convert more than 40 percent of (lens-concentrated) sunlight into electricity, more simple semiconducting materials such as silicon hover around 20 percent when mass-produced. And, at best, such cells could convert only a third of incoming sunlight due to physical limits.
But one of those physical limits may have just been stretched: heat loss. Nanosize crystals of semiconducting material, in this case a mixture of lead and selenium, move electrons fast enough to channel some of them faster than they can be lost as heat, according to new work from researchers at the universities of Minnesota and Texas.
Solar cells employ semiconducting material because when a photon of sunlight of the right wavelength strikes that material, it knocks loose an electron, which can then be harvested as electrical current. But many of those loosened electrons dissipate as heat rather than being funneled out of the photovoltaic cell. Previous work in 2008 had shown that nanocrystals of semiconducting material can, in effect, slow down such "hot" electrons. As a result, these nanocrystals, also known as quantum dots, might be able to boost the efficiency of a solar cell.
The new research published in Science June 18 shows that is indeed the case: Not only can quantum dots capture some of the "hot" electrons but they can also channel them to a typical electron-accepting material—the same titanium dioxide used in conventional solar cells.
In fact, that transfer takes place in less than 50 femtoseconds (a femtosecond is one quadrillionth of a second, or really, really, really fast). Because that transfer is so fast, fewer of the excited electrons are lost as heat, thus boosting the theoretical efficiency to as high as 66 percent.
Unfortunately, that's not all that's required to build such a highly efficient solar cell. The next step would be to show that the captured electrons and transferred current can be carried away on a wire, as in a conventional solar cell. The challenge will be making a wire small enough to connect to a solar cell incorporating a quantum dot no bigger than 6.7 nanometers in diameter—and one that won't lose much of the current as heat. And it would be years if not decades before such quantum dot-based solar cells might be manufactured. But these chemists have lit at least one path to a more efficient solar future.
Quantum dots for highly efficient solar cells
Jun 24, 2010
The efficiency of solar cells could be increased to more than 60% from the current limit of just 30% according to new work by scientists in Minneapolis and Texas
The maximum efficiency of conventional solar cells made from silicon-based semiconductors is limited by theory to around 31% – and the best performing affordable commercial devices are less than 20% efficient. This is because in typical devices, photons with energies above the semiconductor's bandgap generate "hot" charge carriers (electrons and holes) that quickly cool to the band edges in a matter of just picoseconds, releasing phonons (vibrations of the crystal lattice, or heat). If the energy of these hot electrons could be captured before it is converted into wasted heat, solar-to-electric power-conversion efficiencies could be increased to as high as 66%, say scientists.
The first step towards doing this has already been demonstrated – by research done in 2008 by Philippe Guyot-Sionnest's group at the University of Chicago University of Texas at Austin and colleagues at the University of Minnesota , Minneapolis
The team found that the electrons can be transferred from photo-excited lead selenide (PbSe) crystals to an adjacent electronic conductor made of titanium dioxide. The researchers demonstrated the effects in quantum dots made of PbSe but the method could work just as well for quantum dots made from other materials.
Electron transfer
PbSe was chosen because it has an extremely large Bohr radius of 46 nm. This means that charge carriers in PbSe quantum dots (which are less than 10 nm in size) are strongly confined in the dots and that their electron wavefunctions extend well beyond the nanocrystal's surface. This "delocalization" allows electron transfer from the nanocrystals to an electron-accepting material placed nearby, such as TiO2. TiO2 was chosen because it is readily available as single crystals and can accept electrons easily.
The researchers began by making samples of one or two monolayers of PbSe quantum dots deposited on flat single-crystalline TiO2. The films were chemically treated with solvents to enhance electronic coupling between the two materials.
Zhu's team tested PbSe nanocrystals with diameters ranging from 3.3 to 6.7 nm. By using UV photoelectron spectroscopy and optical absorption measurements, the researchers determined the energy of the lowest excited electronic states in the nanocrystals. They found that these states were always below the TiO2 conduction band, which means that hot electrons from the quantum dot can transfer from the PbSe to the TiO2.
'Nice surprise'
The researchers didn't expect to see hot-electron transfer in action, just the transfer of ordinary electrons. "We realized that, to improve the way in which we assemble solar cells based on quantum dots, we needed to understand the fundamentals of electron transfer from the quantum dots to semiconductors," team member Eray Aydil told our sister website nanotechweb. "Zhu and our co-advised student Will Tisdale (who will soon obtain his PhD) developed the method reported here to detect this electron transfer. The fact that we ended up seeing hot-electron transfer was a very nice surprise."
Aydil adds that much work still needs to be done before we see solar cells with efficiencies of over 60%. "I think all of us and everyone working in this field would caution against making predictions on when we will see (if ever) 66% efficient solar cells. However, if such high-efficiency solar cells based on hot-electron transfer are to be become a reality, we have shown the necessary first step."
The team will now attempt to detect the transferred electrons as current and make solar cells that exploit hot electron transfer, even if the efficiency is still low.
The work was reported in Science.
About the author
Belle Dumé is a contributing editor to nanotechweb
No comments:
Post a Comment