Friday, March 17, 2017

Beware The Bakken


I reported here quite extensively on the Bakkan as it really was the leading edge of drilling technology in particular.  It was quite marvelous to watch the massive deployment of capital to exploit a well known deposit with that new technology.

My real concern was that everyone was mum on the real decline data.  They probably did not know but they also had ample reason to be optimistic as traditional numbers would overstate things.  That is never a good combination and the formula for postponing write downs until the capital is all spent. .That is even a worse idea.





The take home today is that the Bakken is drilled out and that real decline rates are actually worsening.  For that reason we can expect a steady rapid decline that could last as little as two years.  The question is whether the wells have a low level production model that allows operation for many additional years as strippers.  You sort of want that in order to amortize equipment and abandonment costs.

Low oil prices have made this play marginal, but not unjustified.  I hope that the Permian does better.







Beware The Bakken

http://www.zerohedge.com/news/2017-03-02/beware-bakken
It’s the beginning of the end for the Bakken Shale play.
The decline in Bakken oil production that started in January 2015 is probably not reversible. New well performance has deteriorated, gas-oil ratios have increased and water cuts are rising. Much of the reservoir energy from gas expansion is depleted and decline rates should accelerate. More drilling may increase daily output for awhile but won’t resolve the underlying problem of poorer well performance and declining per-well reserves.
December 2016 production fell 92,000 barrels per day (b/d)–a whopping 9 percent single-month drop (Figure 1). Over the past two years, output has fallen 285,000 b/d (23 percent). This was despite an increase in the number of producing wells that reached an all-time high of 13,520 in November. That number fell by 183 wells in December.
(Click to enlarge)
Figure 1. Bakken Production Declined 92,000 bopd (9 percent) in December. Source: North Dakota Department of Mineral Resources and Labyrinth Consulting Services, Inc.
Well Performance Is Declining
Well performance was evaluated for eight operators using standard rate vs. time decline-curve analysis methods. These operators account for 65 percent of the production and also 65 percent of producing wells in the Bakken play (Table 1).
(Click to enlarge)

Table 1. Operators, Cumulative Oil Production, Total Producing Wells and 2012-2015 Wells Used for Decline-Curve Analysis (DCA) in this study. Source: Drilling Info and Labyrinth Consulting Services, Inc.
Estimated ultimate recovery (EUR) decreased over time for most operators and 2015 EUR was lower for all operators than in any previous year (Figure 2). This suggests that well performance has deteriorated despite improvements in technology and efficiency.
(Click to enlarge)

Figure 2. Bakken EUR (Estimated Ultimate Recovery) Has Generally Decreased Over Time. Source: Drilling Info and Labyrinth Consulting Services, Inc.
Figure 3 shows Bakken EUR and the commercial core area in green. The map on the left shows all wells with 12-months of production history and the map on the right, all wells with first production in 2015 and 2016.
Most 2015-2016 drilling was focused around the commercial core area. The fact that EURs from these core-centered locations were lower than earlier, less favorably located wells indicates that the commercial core is showing signs of depletion and well interference.
(Click to enlarge) 
Figure 3. Bakken EUR map showing all wells with 12-months of production and all wells with first production in 2015 and 2016. Source: Drilling Info and Labyrinth Consulting Services, Inc.
Well-level analysis indicates a fairly systematic steepening of decline rates over time. Figure 4 shows Continental Resources wells with first production in 2012 and 2015. 2012 wells have a shallow, super-harmonic (b-exponent = 1.3) decline rate but 2015 wells have a steeper, weakly hyperbolic (b-exponent=0.2) decline rate.
Oil reserves for 2012 wells averaged 343,000 barrels but only 229,000 barrels for 2015 wells–a 33 percent decrease in well performance. Steeper decline rates result in lower EURs.
(Click to enlarge)
Figure 4. Well-level analysis shows steeper decline rates for more recent wells than for older wells. Source: Drilling Info and Labyrinth Consulting Services, Inc.
Gas-oil ratios (GOR) for most operators increased from 2012 through 2014 and then, decreased for wells with first production in 2015 (Figure 5).*
(Click to enlarge)
Figure 5. Bakken gas-oil ratios generally increased over time but then decreased in 2016. Source: Drilling Info and Labyrinth Consulting Services, Inc.
Changing GOR is important because it suggests decreasing reservoir energy. The Bakken has a solution gas drive mechanism. Initially, oil is produced by liquid expansion across the pressure drop from the reservoir to the well bore. Later, gas dissolved in the oil expands and this is the mechanism that lifts oil to the surface.
Rapidly increasing GOR in the Bakken probably indicates partial reservoir depletion and subsequently decreasing GOR suggests more advanced depletion accompanied by declining reservoir pressure, declining oil production and increasing water cut (Figure 6). 
(Click to enlarge)
Figure 6. Increasing gas-oil ratio indicates partial reservoir depletion–Decreasing gas-oil ratio indicates advanced depletion. Source: Schlumberger and Labyrinth Consulting Services, Inc.
The sequence of events summarized in Figure 6 is demonstrated in Bakken field production shown below in Figure 7. Gas increased before oil production peaked in December 2014 and continued increasing through March 2016, and then declined.
(Click to enlarge)
Figure 7. Bakken gas production increased as oil production peaked and then it declined. Source: Drilling Info and Labyrinth Consulting Services, Inc.
Water cut—water as a percent of total liquid produced—has increased for most operators over time (Figure 8) and this provides additional support for progressive Bakken depletion.
(Click to enlarge)
Figure 8. Bakken water cut has generally increased over time. Source: Drilling Info and Labyrinth Consulting Services, Inc.
Company Performance, Break-Even Prices and Future Drilling Locations
Well performance for the 8 key operators shown above in Table 1 above provides a framework for company performance and break-even prices for the Bakken play.
Reserves were estimated for more than 4,400 wells with first production in 2012 through 2015 using standard rate vs. time methods. Decline-curve analysis (DCA) was used to evaluate wells with at least 12 months of production history for key operators. Production group DCA was done separately by operator and year of first production for oil, gas and water.
Results are summarized in the following tables.
(Click to enlarge)
Table 2. Summary tables of key operator EUR and break-even prices and economic assumptions. Source: Drilling Info and Labyrinth Consulting Services, Inc.
None of the key operators’ average well breaks even at current Bakken wellhead prices of $42.50 per barrel although ConocoPhillips ($43.08 break-even price) is very close. EOG, XTO and Marathon all break even at prices less than $50 per barrel but other operators need higher oil prices to break even. It is worth noting that Bakken wellhead prices are about $10 per barrel less than WTI benchmark prices.
Current well density was calculated by measuring the area of the $50 commercial area (406,000 BOE cutoff) and dividing by the number of horizontal wells within that area. There are 5,500 producing wells within the 1.2 million acre commercial area shown in Figure 9. That equates to a current well density of 215 acres per well.
Figure 9. Bakken EUR map showing the $50 (406,000 BOE EUR) commercial area and well density table. Source: Drilling Info and Labyrinth Consulting Services, Inc.
Tight oil operators describe infill spacing of 40 to 120 acres per well favoring the lower end of that range. Current well density in the Bakken core of 215 acres per well suggests substantial infill locations remain yet declining EURs, increasing water cut and falling GOR do not support further infill drilling.
The Bakken is unique because of the extraordinary lengths of lateral wellbores compared with other tight oil plays. Laterals are commonly more than 10,000 feet in length and often approach 12,000 feet.
Figure 10 shows lateral lengths in the Bakken. It is clear that within the commercial core area, most laterals exceed 8,000 feet. Available evidence suggests that current well density is sufficient to fully drain reservoir volumes. That implies that further drilling will not result in producing new oil volumes but will interfere with and cannibalize production from existing wells.
(Click to enlarge)
Figure 10. Bakken lateral length map. Source: Drilling Info and Labyrinth Consulting Services, Inc.
The Downside of Technology
The Bakken play represents the fullest application of modern horizontal drilling and hydraulic fracturing technologies. The Middle Bakken and Three Forks reservoirs are tight, naturally fractured sandstones that respond exceptionally well to long laterals and multi-stage fracture stimulation. Field rules allowed long laterals well before these were feasible in other plays.
The downside of efficiency and technology is that depletion has accelerated. Resulting higher initial rates masked underlying field decline that is becoming apparent only in wells with first production in 2015. The evidence for depletion is compelling but pressure data is not publicly available and is needed to complete the case.
The most appealing aspect of resource plays is their apparent lack of risk. Source rocks are the drilling target so finding oil and gas is given. Because the plays are continuous accumulations, there is no need to map and define a trap. Since the reservoirs are tight, seals are not an issue either. But commercial risk should be more of a concern for investors than it seems to be so far.
The downside is that there is no way to stay away from water and it is produced from day one in large volumes. The Bakken has produced 1.5 billion barrels of water along with its 2.2 billion barrels of oil over the decades. Where are they putting it and what does that cost?
Investors should be worried. As analysts cheered the resilience of shale plays after the 2014 price collapse, nearly a billion barrels of Bakken oil were produced at a loss--about 40 percent of total production since the 1960s. Vast volumes of oil were squandered at low prices for the sake of cash flow to support unmanageable debt loads and to satisfy investors about production growth. The clear message is that investors do not understand the uncertainties of tight oil and shale gas plays.
And all major Bakken producers continue to lose money at current wellhead prices. If observations presented here hold up, there may be nowhere for the Bakken to go but down. Higher oil prices may not help much because the best days for the play are behind us. Future profits were sacrificed for short-term objectives that lost the companies and their shareholders money.
The early demise of the Bakken should serve as a warning about the future of other tight oil plays.

No comments: