Saturday, April 18, 2015

Battery Bounce Test Often Bounces off Target

Batteries bounce_1

 

This story is bouncing around the internet and it is not particularly correct except when the battreries are fresh.  Most problems come from the need to use batteries often weeks if not months old.  We all need a simple tester that is not too complex or expensive because the alternative has been to actually waste batteries.


A lot of batteries sold are not necessarily fresh either.


Thus while we generally do alright with modern batteries, their  capacity has remained suspect.  Selling bulk batteries automatically freshened up may be a possible business proposition.  It may turn out to be a lot easier than recharging spent batteries generally.



.

Battery bounce test often bounces off target

Posted March 30, 2015; 10:00 a.m.

by John Sullivan, Office of Engineering Communications


http://www.princeton.edu/main/news/archive/S42/72/95S25/index.xml

Don't throw away those bouncing batteries.

Researchers at Princeton University have found that the common test of bouncing a household battery to learn if it is dead or not is not actually an effective way to check a battery's charge.

"The bounce does not tell you whether the battery is dead or not, it just tells you whether the battery is fresh," said Daniel Steingart, an assistant professor of mechanical and aerospace engineering and the Andlinger Center for Energy and the Environment.

Shoham Bhadra, a doctoral student in electrical engineering and the Andlinger Center for Energy and the Environment (left), and Daniel Steingart, an assistant professor of mechanical and aerospace engineering and the Andlinger Center, found that changes in the bounce of common batteries signal important changes that occur as the battery discharges. (Photo by Frank Wojciechowski for the School of Engineering and Applied Science)

The battery bounce test, popularized in online videos, shows that fully charged batteries bounce very little when dropped, while those that have been used for a while bounce higher. The height of the bounce increases as the batteries discharge, and that has led to the common conclusion that internal changes related to the reduction in charge are the cause of the higher bounce.

"A year ago a buddy of mine who knows I work on this sent me this video and said did you know this happens?" Steingart said. "I didn't. But I had a bunch of batteries on my desk and I was able to verify it."

Steingart was intrigued by how the bouncing changed as batteries discharged — it was not a linear increase. Instead, the height rapidly increased and then leveled off. His research team has been working for some time on internal changes related to battery discharge, and he wondered whether the changing bounces reflected an important change in the batteries.

They devised a quick experiment in which they dropped a common battery through a plexiglass tube and used a computer microphone to record it striking a benchtop. The researchers were then able to use the time between bounces to determine the height of the bounce.

"What I really loved about this experiment is that the result holds a lot of scientific importance, but it is also the kind of thing I can show to someone without a scientific background and they can still get something out of it," said Shoham Bhadra, a graduate student in electrical engineering and the Andlinger Center for Energy and the Environment and the lead author of the research paper reporting the findings.

In other research into the materials used in alkaline batteries, the team had obtained data from X-ray scans of batteries made at Brookhaven National Laboratory. They combined the results of their drop tests with the scan data to evaluate what caused the changes in bouncing.




The battery bounce test, popularized in online videos, has led to the common conclusion that a high bounce means a dead battery. But researchers at Princeton University have found that bouncing is not actually an effective way to check a battery's charge. (Video courtesy of Shoham Bhadra, electrical engineering and the Andlinger Center for Energy and the Environment, and Daniel Steingart, mechanical and aerospace engineering and the Andlinger Center)

They found out it had to do with the way the batteries produce power. Electricity is generated by a chemical reaction inside the batteries as zinc changes to zinc oxide. Initially, a layer of zinc surrounds a brass core in the battery like a donut around a hole. As the battery discharges, the zinc donut gradually changes to zinc oxide.

"The zinc oxide begins to form on the outside and it pushes its way to the core," Steingart said. "As you get more and more zinc oxide, and the zinc oxide begins to appear everywhere in the zinc layer, the battery gets bouncier and bouncier."

In an article published March 13 in the online version of The Journal of Materials Chemistry A, the researchers conclude that the bounces increase because the zinc oxide forms tiny bridges within the zinc material, which decreases the mechanical damping of the battery.

"The zinc starts out as a packed bed of particles that all move very nicely past each other," Steingart said. "When you oxidize the zinc, it makes bridges between the particles and makes it more like a network of springs. That is what gives the battery its bounce. "

Steingart said that is not too surprising, as zinc oxide is listed as a component to add bounce to golf balls in many patents. 

But the formation of the bridges reaches a maximum "bounce level" well before the oxidation of the zinc is complete. That means that the bounce will reach a peak and level off well before the battery is dead.

"While this test seems a parlor trick, the way in which the coefficient of restitution changes provides startling insight to not only what reaction is occurring into the battery, but where the reaction is occurring as a function of state of charge," Steingart said.

In addition to Steingart and Bhadra, the researchers on the project include Benjamin Hertzberg and Andrew Hsieh, postdoctoral researchers in mechanical and aerospace engineering at Princeton and at the Andlinger Center for Energy and the Environment; Mark Croft of Rutgers University; Joshua Gallaway of City University of New York; Barry Van Tassell of City College of New York; Mylad Chamoun, Can Erdonmez and Zhong Zhong of Brookhaven National Laboratory; and Tal Sholklapper of Voltaiq. 

Support for the project was provided in part by the National Science Foundation, the U.S. Department of Energy and Brookhaven National Laboratory.

No comments:

There was an error in this gadget